| Catalogue PP Catalogue PDF |
Please call 1-800-663-1101 for our catalog or send your questions about this product category to email info@woodcarvingsupplies.com.
Panavise Standard Base
Panavise Standard Base holds all the regular Pana Vise Heads abd circut board holders. The patented single load control knob and exclusive split-ball feature that has a range of tensions which permits movement of the work to any desired position. This single knob firmly locks the head into place. Loosen the knob reduces the load on the split ball, permitting the head to be removed from the base. This exclusive feature allows use of numerous heads with one base. By acquiring different heads, a versitile holding system is created at a reasonable cost. This base has three mounting holes for permanent attachment directly to work bench or to various portable base mounts. It is 3 3/4" (95mm) high and accepts all 5/8" (16mm) stems.
Order Number: PAN300 Regular Price: CDN $38.55 (~US $38.55 ) |
Panavise Standard Head
Standard Head . Jaws are 2 1/2" (64mm) wide and open to 2 1/4" (57mm). The tough yet gental ,nylon jaws have a tough satin finish to improve grip. Steel , Brass, Teflon, and grooved nylon jaws are available as accessories for all heads. This general purpose head has exceptional quality and strength. The stem is 2 1/8" (54mm) long and 5/8" (16mm) in diameter.
Order Number: PAN303 Regular Price: CDN $46.21 (~US $46.21 ) |
Panavise Bench Clamp Base Mount
The 311 Bench Clamp Base Mount is for the 300 Standard or 305 Low Profile Base. It calmps to the edge of any work bench or table up to 3 1/2" ( 89mm) thick. Four neoprene pads are included and may be used when additional anti-slip characteristics are desired without excessive tightening of the clamping screw. using the pads also helps prevent marring of the table surfaces. Three screws are included for mounting a base to the bench clamp.
Order Number: PAN311 Regular Price: CDN $72.10 (~US $72.10 ) |
Panavise Fixturing Head
The Fixturing Head allows permanent fixturing for production line assembly or repetitive repair. Work can be bolted to this head easily because of its six slots and bolt holes. Wood carvers and patterns makers can easily secure their blanks to this head. The work is heald firmly in any position through final finishing. The flat round surface is 5 3/8" (137mm) in diameter. The steel stem is a die cast into the aluminum head and is 2" (51mm) long and 5/8" (16mm) in diameter.
Order Number: PAN337 Regular Price: CDN $34.75 (~US $34.75 ) |
Panavise Self Centering Head
The Panavise Self Centering Head has extra wide opehing jaws and a fast- feed screw action, providing a full 9" to hold projects. It is equipped with reversible non marking jaw pads to grip irregular items firmly. This is a very useful accessory for the woodcarver. It has a 5/8" steel stem
Order Number: PAN376 Regular Price: CDN $65.60 (~US $65.60 ) |
Panavise Heavy Duty Base
The 400 Heavy Base has been designed for heavy weights and pressure It is 4 1/8" (105 mm) square with four 5/16" (8mm)mounting holes. Designed specially to be used with the 437 Heavy Duty Fixturing Head. It will akso accept any 1" (25mm) stem or post. An additional feature allows the user to change between a serrated or smooth face on the ball housing for more positive adjustment of the tilt control.
Order Number: PAN400 Regular Price: CDN $72.50 (~US $72.50 ) |
Heavy Duty Head for the 400 Base ONLY
The 437 Heavy Duty Head is only used with the 400 Heavy Duty Base. This rugged head gives you a positional device for working on heavy parts, lawnmower moters, typewriters, etc. It is extensively used as a heavy camera mount. The head is made of heavy cast aluminum, 3" x 6" (76mm x 152mm) with a 1" (25mm) dioameter shaft.
Order Number: PAN437 Regular Price: CDN $41.35 (~US $41.35 ) |
|
Order Number: Regular Price: CDN (~US $0.00 ) |
|
Order Number: Regular Price: CDN (~US $0.00 ) |